Equiped with a CBN cutter, this is used in conjunction with True Deck fixture to precisely and accurately surface blocks and to surface cylinder heads to the specific surface finish needed. These carbide cutter replacement tips fit Storm Mill 85, 85B, 85BE, 85C and 280. For Broach-Style Surfacers. Enlarged to show detail. Look for an old storm-Vulcan 85 or 85B. Put insert cutters on it and go to work. It should be cheap ($1000 or so plus cutters). Fairly easy setup with angle plate and jacks. Good finish on most metals and 8 to 10 jobs per day if you are good at setup. ON THE PREMISES OF TRI VALLEY MACHINE CYLINDER HONING MACHINE SUNNEN Mdl. CV-616 Automatic Cylinder Honing standard tooling and manual centering, 3/4 hp. motor, (2) STORM-VULCAN Mdl. 85B-E Cylinder Head and Block Surfacing Mill, w/18" cutting head, (16) Guide and seat machine: Serdi 100 remanufactured by serdi in 2002 Guide and seat machine cast iron base tilt table drill chuck VS motor control-0-100 floating spindle all manuals 15 pilots 0.0104-0.3132 range-shown 3 cutter heads-1 in machine-shown 5 carbide holders-shown no carbide cutters-included setting tool wrenches valve guide tool Accu-Deck shown on a Storm Vulcan 87BE. Accu-Deck shown on a Van Norman 570. LW-1200 - Accu-Deck Block Decking Kit. COMPARISONS: Heavier Aligning Bar, More Stability More Positive Cam Shaft Aligning System. Fewer Parts, Faster to Set-Up. Universal Indexing Plate, Use on Any Machine. Indexing Plate Can Be Indicated from Top or Bottom for bore FS: Storm Vulcan 85B block and head mill Up until 5 years ago, a friend of mine was the only machinist at a small local engine rebuilding shop. When the shop was bought out and closed down, he bought many of the machines he used, and brought them home with the intention of going into business for himself. Find great deals on eBay for storm vulcan and sunnen. Shop with confidence. Storm Vulcan 85B Head & Block Resurface Milling Machine Rottler Winona Roll Over.