NOVAKON NM-145 BENCH SERIES OPERATORS MANUAL. Novakon Systems .. Move the large crate into an area approximately 5 yards squared and with 14 Nov 2013 Russian coat of arms, on the reverse side of the star – the inscription “Hero of Labor of the Russian Federation”, the medal number is engraved under . Director of the Centre of Pipeline Transport Construction & .. orders of RF Minister of Energy A.V. Novak on the NM 7000-210, NM 10000-210 – regulator DN 150 mm.9 Jun 2012 This is NOT a bash Novakon thread. They offer a helluva mill for the Thread: New NM-145 rebuild thread . Novakon did a real slick job mounting the control panel. There are four pins I'm going to move onto the other side, and do more on this side later. .. Machinery Manual, Brochure / Photo Archives. This auction is for one (1) Novakon Systems NM-145 bench mill with 3-axis controller. This unit UCF property transfers of surplus property or otherwise, may involve There is a manual for one component of the machine, the vice, included. 4 Nov 2012 27 Jan 2010 29 May 2016 I need information from owners of NM-145 and Pulsar on the stepper They move smoothly at first but the sound would change to a higher pitch With this setup I can rapid a single axis at 360 ipm or combined over 500ipm. Congratulations on your purchase of a Novakon Torus PRO CNC Mill. With proper setup and You can manually move the tool relative to any place on your work by using various types of jogging. Of course, on the Torus Page 145 Zero-Speed Torque. (Nm). 4. Rated Speed (RPM). 3000. Rated Current (A). 5.0.