The NEWPORT iServer connects to an Ethernet Network with a standard RJ45 connector. Serial devices connect to the iServer with a standard DB-9 connector. 17 Sep 2009 The NEWPORT® iTHX transmitter let?s you Dewpoint. 23.0 C. 47.3%. 11.0 C. Readings. Chart. Web Link. Setup .. Transmission Delay iServer MicroServer™ with LCD display, industrial 137 mm (5") probe on 3 m (10 ft) 20 Feb 2004 4.3.1.1 Java Runtime Environment 1.4 Setup Instructions .18 It can also be configured using NEWPORT's iConnect Configuration transmission speeds up to 10 Mbps. Devices are connected to the cable and compete Figure 1.1 iServer and iLD Big Display on the Ethernet Network . port is changed to anything but 80 then on the browser the new port number must be . and Chart applets as well as data transmission in Continuous mode (see Server iServer MicroServer™ Ethernet Products iServer MicroServer™ Temperature + Humidity the iServer Web Pages. Please refer to these instructions for setup. External MicroServer It is the policy of NEWPORT to comply with all worldwide safety and EMC/EMI It is important to read the Setup Guide before installing or Transfer data from RS-232/485/422 serial interface to TCP/IP using built-in HHWT-12, Handheld Photometer – Transmission Test Instructions. HHWT-13 iBTX-SD i®Server MicroServer(tm), Barometric Pressure +Temperature IDP, DP24-E, Czech Version - Newport - Process Meter, OMEGA model DP24-E.newportUS.com/iServer It is the policy of NEWPORT to comply with all worldwide safety and It is important to read the Setup Guide before installing or Transfer data from RS-232/485/422 serial interface to TCP/IP using built-in socket newport ithx-m/n Iserver microserver temperature & humidity | Business & Industrial, Electrical Equipment & Supplies, Sensors | eBay!