Nash County North Carolina. Nash County North Carolina; Okmulgee County Oklahoma; Division No. 8 Canada The S3-PCIE1XG201-A is a SATA III (6 Gbps) to PCI Express x1 Gen2 Host Card SATA III 6Gb/s PCI Express x1 Gen2 Host Card - Marvell 88SE9128 | S3-PCIE1XG201-A IOI Technology Corporation Your I/O Solution Provider Drivers Marvell 88Se9128 Driver 0 Comments Read Now. 2xx SATA Driver 1. If the driver is. From what I understand and some info in the backl of my mind from an article a while back. Marvell controllers use the PCIe bus. Intel is embedded into the Southbridge chip on most MOBOs. Therefore Marvell is limited by the PCIe Bandwidth. ASUS P6X58-E WS -> Marvell 88SE9128 -> ROM Update. Pages (2): Marvell has put out a update for gig mobo's not for ASUS. This update runs Linux and is done in DOS, before windows, so if you run the update you will see it say marvell updated. DB:5.44:Change Sata Controller Mode From Raid To Ahci m3 . (Marvell 88SE9128 chipset) I installed my OS on my C300 128GB without checking for AHCI first. It is plugged into one of the 2 SATA3 ports on my system board.When my computer boots up I see this screen flash by: (Linux / BSD Marvell 91xx SATA 6G Controller. The Intel driver version is 3.0.0.2003. and Marvell 1.2.0.1010 Both are current. MB is X79-UD5 running at stock. Firmware V7 I am wondering if the problem is still with the Marvell ports as I have read about issues with their SATA 6G - this was from a year ago. marvell 88se9128 64 bit drivers download - X 64-bit Download - x64-bit download - freeware, shareware and software downloads. The Marvell family of PCIe-to-SATA 6Gb/s host controllers offer an ideal cost effective solution for connecting Serial ATA (SATA) peripherals to a PCI Express (PCIe) 2.0 host, delivering up to 2GB bandwidth. The Marvell 88SE9128 is a SATA 3 chip and it is used in Gigabyte GA-770TA-UD3 motherboard. I have these board and I tried using IDE and as well AHCI but it still unable to dete