Instruction manual - AQ 110 arc protection unit ) 2 (62 Revision 1.3 Date April 2012 Changes - AQ SAS ™ chapter is removed from manual. Revision 1.4 Date July 2012 Changes - Scheme Select Dipswitch Settings chapter is added. - The point sensor max. wiring length is up to 200 meter s. - System self -supervision chapter is revised. View a manual of the Casio AQ-S810W-1A below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view. ISA-DS Instruction manual_20141119_Rev08_gb_kq 13 / 114 2 Starter Selection 2.1 Starter Selection - Presentation Principle description ISA-DS is a highly sophisticated and reliable starter, designed for use with standard medium voltage three-phase, squirrel cage induction motors or synchronous motors. It provides the best method of reducing The ISO/ANSI classification 97C64515 stated in this manual refers to the complete source capsule which is attached to the source assembly. This classification also applies to the Se-75, Co-60 and Cs-137 versions of the source assemblies. The sealed source is swaged to one end of a source holder consisting of a short flexible steel cable which IM8270EN02-040301 Technical documentation - Instruction manual - 8270 www. isa swiss.com Page 4/6 Instruction manual - Calibre 8270 I. "Second chance" count down adjustment The user can at anytime during the count down period adjust the count down timer, except the last minute. The single phase relay test set mod. T1000 is suited for the testing and adjustments of the following types of relays. Type of relay IEEE code with manual and semi-automatic . DOC. SIE10093 Rev. 10 Page 6 of 36 testing capabilities, and with the possibility to transfer test results to a PC testing device, with manual and automatic testing capabilities, and with the possibility to transfer test results to a PC via the RS232 interface. These results can be recorded