Pretreatment Standards Guidance Documents Control Authority Pretreatment Audit Checklist and Instructions National Pretreatment Standards Guidance Documents Controlling Fats, Oils and Grease Discharges from Food Service Establishments National Pretreatment Standards Guidance Documents Effluent Electroplating and Metal Finishing regulations, have already received similar guidance in the Guidance Manual for Electroplating and Metal Finishing Pretreatment Standards (February 1984). yNotification of IUs of applicable Pretreatment Standards or Requirements. ALL INDUSTRIAL USERS SIGNIFICANT INDUSTRIAL USER (PERMIT) Basis Metal Finishing Electroplating Regulation 40 CFR 433 40 CFR 413 yGuidance Manual - Electroplating and MF Portions of the material contained in this MANUAL were taken from GUIDANCE MANUAL FOR ELECTROPLAT- ING AND METAL FINISHING PRETREATMENT STANDARDS, U.S. Environmental Protection Agency, Effluent Guidelines Division and Permits Division, Washington, D.C., February 1984. The manual provides information to assist Control Authorities and Approval Authorities in implementing the National Categorical Pretreatment Standards for the Iron and Steel Manufacturing Point Source Category (40 CFR Part 420). It is designed to supplement the more detailed documents listed as This manual provides guidance to Publicly Owned Treatment Works (POTWS) on the application and enforcement of the Categorical Pretreatment Standards for the Electroplating and Metal Finishing Categories. C. In order to provide the reviewing agency a complete understanding of the facility's processes, location of pretreatment facility's and sampling points, the discharger is required to submit a schematic of each process and a schematic of wastewater flows. Flow rates may be estimated. Refer to examples 1 and 2 for example schematics. Guidance manual for electroplating and metal finishing pretreatment standards (SuDoc EP 1.8:EL 2/3) [U.S. Environmental Protection Agency] on Amazon.