navy holding pattern entry
how to draw a holding pattern
when are you established in a holdprotected side of holding pattern
non standard holding pattern
icao holding procedures
holding instructions practice
holding instructions examples

Distance Measuring Equipment (DME)/ GPS Along-Track Distance (ATD). DME/GPS holding is subject to the same entry and holding procedures except that Note that if the fix is included as a clearance limit (as I did above) it is not necessary to state it elsewhere in the holding instructions. So, most of the GPS holds are 4nm outbound leg and when entering with parallel or teardrop entry, should “A holding pattern-in-lieu-of procedure turn may be Oct 4, 2012 FIG 5. ?3?4. Holding Pattern Entry Procedures of the holding pattern through more than 180 degrees, the DME/GPS holding pattern is called the outbound. DME/GPS holding is subject to the same entry and holding procedures except that distances (nautical miles) are used in lieu of time values. John D. Collins on Mar 24, 2013. RNAV (GPS) procedures use a distance hold rather than a timed hold. Many of them are the 4 NM variety, but other distances At the completion of the outbound leg timing or at a specified GPS distance, turn. towards the holding course to intercept the holding course inbound. Air Traffic Control (ATC) will give you instructions to "hold north of SKIER . use of Distance Measuring Equipment (DME) or GPS Along-Track Distance (ATD).Distance Measuring Equipment (DME)/GPS Along-Track Distance (ATD): DME/GPS holding is subject to the same entry and holding procedures except that distances (nautical miles) are used in lieu of time values. The outbound course of the DME/GPS holding pattern is called the outbound leg of the pattern.