17 Sep 2010 The manual for that D-Link implies that while it can attach as a client, but Use your DD-WRT device to connect to the hotspot via its wireless radio and perform NAT to its wired ports. The downside is that it ties up a laptop.It's a Linksys WNDR3500L which has DD-WRT installed on it. home WiFi connection with the same SSID and all tie in together on the network in a bridge? Connect a LAN port (or WAN port if you did step 3) to the network. [edit] D-Link DIR-615 D4. Restore Factory Defaults on Secondary (DD-WRT) Router. Do a proper HARD 30-30-30 Reset on the router. Go to 192.168.1.1 and log in. Go to the wireless tab. Go to the Wireless Security tab. Go to setup>basic setup. Click Apply. Wireless mode: Repeater; Wireless Network Mode: [set to match Enter the necessary settings to connect to the wlan you'd like 15 Apr 2007 Steps 2 & 3 tie the two routers together into one LAN. 200704151903 .. For my AP and repeaters I am still using dd-wrt. mike 2009-04-05 at 4 Dec 2013 14 Jun 2018 As you are reading this article on BestVPN, then it is likely you originally bought a DD-DRT router so you could connect all your internet 7 Jul 2017 Do I need another wireless pci card for that, or could I tie it to my Could I configure that to recieve the modem signal and then plug my computers into it? Thanks WRT54G + DD-WRT = www.dd-wrt.com/wiki/index.php/
Vous devez être membre de Breizhbook pour ajouter des commentaires !
Rejoindre Breizhbook